Under construction, please check back soon!
Parts List
Diamond saw blades
4" up to 36"
Diamond coring bits for concrete
1/2" to 14" in diameter
Diamond coring bits for Masonry
1" up to 6" in diameter
Anchoring epoxy
SDS bits
5/32" in diameter up to 1-1/4"
4" up to 54" in length
SDS MAX bits
3/8" in diameter up to 2"
13" in length up to 48"
Carbide End Mills
1/16" up to 1"
American made drill bits up to 2"
High Speed Steel, Cobalt, Letter, Number, and Left Hand
Drill Indexes
Fractional, Metric, Left hand, Cobalt, Vortex, Tap and Drill, and more!
Specialty Drill Bits
1/8" up to 1"
Aircraft Drill Bits up to 72"
Wedge Anchors
1/4" up to 1-1/4"
Zinc, Stainless, and Hot Dip Galvanized
Drop in Anchors up to 3/4"
1/4", 3/8", 1/2", 5/8", 3/4"
Stainless or Zinc
Drive Pins
Up to 4" in length
Hex and Phillips Tapcons
3/16",1/4",5/16" in diameter
Up to 6" in length
LDT Anchors (Large Diameter Tapcon)
5/16", 3/8", 1/2", 5/8", 3/4" diameter
1-3/4" up to 6-1/4" in length
Set Tools for SDS+ Rotary Hammer
Wire Brushes & Wire Wheels
Flap Discs & Flap Wheels
Grinding Wheels
4-1/2" & 7"
Cut Off Wheels
2", 3", 4", 4-1/2", 6", 7", 14", 20"
Sawzall Blades to 12"
Bimetal, Carbide Tip, Carbide Grit, Diamond
3", 4", 6", 8", 9", 12"
Bridge reamers
5/16" to 2"
Hole Saws up to 8-1/4"
Carbide Grit, Carbide Tip, BiMetal
Carbide Burr Bits
1/4" up to 1" Diameter
Hog bits
9/16" to 1-3/8"
TCT hole cutters to 1" depth
1/2" to 4" in diameter
Unibits to 1-3/8" diameter
Annular cutters for Mag Drills
1/4" to 3" diameter
1", 2", 3", 4", 6", and 8" depth
Spur Bits
1" up to 4-5/8"
Multitool blades
Open fit, closed, and starlock
Bits and bit holders
Phillips, Flat, Square, Torx
Nut drivers & drill adapters
Bolt & pipe taps, dies, and tools
Fractional, Metric, Pipe, and Left Hand
Bar clamps to 40"
Ceiling wire, jack chain screws & concrete anchors
Large Cotter Pins
1/4" to 7/16"
